ADM-IMProVe 2011

International Conference on Innovative Methods in Product Design. San Servolo, Venice (Italy), June 15th – 17th, 2011.

Proceedings

  1. Study of the impact of a bomb on the side of a vessel and validation by comparing the original sheet with numerical simulation

    G. García, A. Álvarez, C. Anido, B. Álvarez

    Abstract

    The present work shows the comparison between the results of simulating the impact of a bomb in the side of the destroyer “Marqués de la Ensenada” structure and the outcomes obtained by digitalizing the original sheet that suffered the crash. On the 2nd of October 1981 an explosive device was placed against the dock of the city of Santander very close to the destroyer, which was in the port collaborating on the surveillance of the borderland. The vessel was then towed to the Santander shipyards with the help of four tugs and moved into dry dock to be urgently repaired. However, the final repair took place later on at the National Company Bazan dockyards, in Ferrol.
    When the damaged elements were substituted, they were handed over to the Naval Museum of Ferrol for exhibition. This material was used to simulate the explosion by means of the finite element method and compare these results with the digital photograph of the real sheet.

  2. Design for recycling problematic: application to composite parts

    Perry Nicolas, Kromm François-Xavier, Pompidou Stephane, Mantaux Olivier

    Abstract

    Purpose:
    The use of composites in industry is ever- increasing. However, in spite of that, end of life solutions for composites are still under development. In this paper, a solution linking design strategies with a recycling process for composite materials will be proposed. The needs and multi-disciplinary skills required for taking recycling possibilities into account in the early stages of product design and the necessity to standardize product recycling capabilities based on design requirements will be discussed.
    Result:
    The paper highlights the need for designers to take a functional approach including characterization of materials and mechanical behaviour, recycling process limits, constraints and opportunities into consideration. The recovery solution for the thermoset composite is a supercritical water solvolysis process. This paper will show the first lessons learned from experiments with this technique.

  3. Construction of a geometric reference model for automatic non-ideality evaluation of an acquired high-density workpiece

    L. Di Angelo, P. Di Stefano, A. E. Morabito

    Abstract

    Purpose: For some years now, our research group has been developing a new methodology for automatic tolerance inspection starting from an acquired high-density 3D model. In this paper, with a view to grouping together all the information recognisable in a scanned object, a new data structure, called Recognised Geometric Model (RGM), is proposed. Based on this data structure, the evaluation of the non-idealities of the acquired object (form, orientation and location non-idealities) can be automatically carried out. Method: RGM is the result of an approach founded on the concepts of non-ideal feature and intrinsic nominal reference. The object to be inspected is segmented into a set of non-ideal features and, for each of them, one or more intrinsic nominal references are identified. An Intrinsic Nominal Reference is detected when a geometric property has been recognised to be common to a set of adjacent points in the 3D data set representing the acquired object. The recognition of these references from a scanned object is carried out based on some rules which, therefore, play a leading role in the definition of the domain of the representable entities within RGM. Result: New and old categories of form non-idealities are here defined and some procedures are proposed for a more robust process of verification of traditional tolerance categories (such as the straightness of a cylinder generatrix). Discussion & Conclusion:
    When using the RGM, tolerances can be specified according to the set of available and recognisable intrinsic nominal references. This allows for the automatic geometric inspection of the workpiece. However, the approach here proposed does not rule out the possibility of querying the RGM data structure by explicit geometric product specifications, in order to gather some quantitative information concerning special intrinsic geometric parameters and/or non-idealities.

  4. 3D Facial symmetry evaluation from high – density scanned data

    L. Di Angelo, P. Di Stefano, A. Spezzaneve

    Abstract

    Purpose: This paper proposes a new method for the identification of the symmetry plane of the human face, starting from a 3D high – density scanned data. This plane is used to evaluate the local and mean asymmetries of the face. Method: The proposed method evaluates the symmetry plane taking into consideration the initial estimation of the symmetry plane performed by an iterative mirroring and registration-based method. Once the mirroring of the original data is carried out with respect to the symmetry plane which has been previously estimated, the source point cloud and the mirrored data are registered by the ICP algorithm that minimises a new weighted function. The final symmetry plane obtained approximates in the least-squares sense the midpoints of the lines connecting homologous points randomly chosen. Result: This method is validated by analysing some specifically-designed test cases. The obtained results show that the method is insensitive to local asymmetries, whether they be near or far from the symmetry plane, and is also repeatable and slightly conditioned by the acquisition process. Discussion & Conclusion:
    This method offers promising applications not just in the medical field but also in the face recognition field. Future work should address how to improve the performance of the method in terms of timing costs and how to use the symmetry plane for face feature segmentation and for facial authentication and recognition.

  5. Parametric Modeling of Free-Form Surfaces for Progressive Addition Lens

    G. Savio, G. Concheri, R. Meneghello

    Abstract

    Purpose:
    By the mid-40s, the amplitude of accommodation has declined sufficiently so that most of us can no longer accommodate clearly and comfortably for close tasks. This condition, called presbyopia, is related to the growth of the lens.
    Nowadays, due to the development of the free-form technologies, the progressive addition lenses (PAL) are the best solution for the presbyopia. To obtain the necessary optical properties, a continuous change in the curvature along a line (called corridor) must be provided on a surface of the lens (progressive surface).
    Method:
    In this work a method for the parametric design and analysis of progressive addition lens, based on discrete shape modeling, is proposed. Both the optical (e.g. power and addition) and the geometrical (e.g. inset, corridor length, amplitude of the distance and near vision area) parameters have been taken into account.
    Result:
    Different parameters are assessed in the design stage of PAL. The method developed for the analysis of surface optical properties, especially with regard to the astigmatic surface power, has proved an essential tool for the analysis of results. A key role in the resultant optical properties of the designed PAL is covered by the distribution of the curves in the intermediate area and by the curvature equation along the corridor.
    Discussion & Conclusion:
    The free-form technologies, recently introduced in the manufacturing process of ophthalmic lenses, allow the production of high performance and custom PALs. Surface power and astigmatic surface power show similar behaviour to other commercial progressive additional lens but, in addition, the designer can define the distribution of astigmatism in the intermediate region. Compared to the methods proposed in literature, this method shows more opportunities in the design parameters definition and allows highly customized lens, designed on the main habits of the wearer. Moreover the exchange data formats for the CNC manufacturing process were described.

  6. Dynamic Splines for interactive simulation of elastic beams in Augmented Reality

    P.P. Valentini, E. Pezzuti

    Abstract

    Purpose: The purpose of the paper is to discuss a methodology for addressing the real-time accurate dynamics simulation of elastic beams using an interactive augmented reality environment. Method: The equations of motion of the elastic beams have been deduced using the dynamic spline theory. According to this approach, the degrees of freedom of the beam are described using control points coordinates. The model has been integrated in an augmented reality environment where the user can interact with the elastic element by using a mechatronic tracker. Result: The dynamic spline model has been successfully integrated in the augmented reality environment. This methodology allows to perform accurate interactive real-time simulations and to deal with large displacements as well. Discussion & Conclusion: The implementation of dynamic spline theory reveals to be a valid formulation for simulation of the flexibility of one-dimension elements like beams. Due to the flexibility of the mathematical formulation, a small set of degrees of freedom is sufficient to simulate a very variable shape of the beam in order to take into account large displacement effects with accuracy. This feature is important for the integration in the augmented reality environment where the simulation has to be computed in real time.

  7. A fast algorithm for manifold reconstruction of surfaces

    L. Di Angelo, L. Giaccari

    Abstract

    Purpose:
    In a previous paper these authors presented a new mesh-growing approach based on the Gabriel 2 – Simplex (G2S) criterion. If compared with the Cocone family and the Ball Pivoting methods, G2S demonstrated to be competitive in terms of tessellation rate, quality of the generated triangles and defectiveness produced when the surface to be reconstructed was locally flat. Nonetheless, its major limitation was that, in the presence of a mesh which was locally non – flat or which was not sufficiently sampled, the method was less robust and holes and non – manifold vertices were generated. In order to overcome these limitations, in this paper, the performance of the G2S mesh-growing method is fully improved in terms of robustness.
    Method:
    For this purpose, an original priority queue for the driving of the front growth and a post processing to efficiently erase the non–manifold vertices are proposed.
    Result:
    The performance of the new version of the G2S approach has been compared with that of the old one, and that of the Cocone family and the Ball Pivoting methods in the tessellation of some benchmark point clouds and artificially noised test cases. The results derived from these experiments show that the improvements being proposed and implemented prevent the generation of non–manifold vertices and render the new version more robust than the old one. This performance improvement is achieved by a small reduction of the tessellation rate as opposed to the old version; the rate is still, however, at least an order of magnitude higher than the other methods here considered (the Cocone family and the Ball Pivoting methods).
    Discussion & Conclusion:
    The results obtained show that the use of the new version of G2S is advantageous, as opposed to the other methods here considered, even in the case of noised point clouds. In fact, since it does not perform the smoothing of points, not even in the presence of very noised meshes, the new version of G2S, while producing more holes than the Robust Cocone and the Ball Pivoting, nonetheless manages to preserve the manifoldness and important details of the object.

  8. BAECULA battle Geographic Information System

    Cárdenas Anguita Inmaculada, Mozas Martínez Francisco, Valderrama Zafra José Manuel

    Abstract

    Purpose: This contribution explains the procedure followed for the construction of GIS applied to the study of the archaeological scene of a battle. It is about the Baecula Battle, that took place in 208 b.C.in the frame of the second Punic War, near to the village of Santo Tomé (Jaén), that faced the Carthaginian army commanded by AsdrubalBarca, with the roman Army commanded by Publio Cornelio Escipion “the African”. The CAAI (Iberic Archaeological AndalusianCenter), along five field works stage, since 2006 until now, have made a job of investigation based on the low level prospection of the artifacts located in the battle area. Method: The methodology used has a land survey phase, consistent in a surface scanning based in a 106 transect system, divided in 3453 square parcels, which cover 40 hectares. In this area was registered the ceramics artifacts detected in each square parcel and then the 6123 metallic rests found with magnetic prospection was geolocated by GPS. During the laboratory phase, took place the identification and classification of the materials. All of this archaeological and geographical information has been integrated to make up a geographical database, been those register the one that link with the battle, implementing with all the available cartography to help the analysis tasks. Result: The operation of the GIS and it application to cartographic analysis techniques has improved the knowledge of the battle development, from the movements of troops through the areas with mayor tacks concentration (that cover the sole of the roman shoe), to the zones where took place the different stages (the assembly of the roman army, fight face to face, etc…). By the way have been done another study of the density of Iberic ceramic artifacts, that together with the presence of nails of the shelter tents, has provide an important indication to locate the zones where the roman and the Carthaginian army placed their camps.

  9. Design time and time architecture

    Pablo Jeremías JUAN GUTIÉRREZ

    Abstract

    Undoubtedly the way in which we inhabit a building is different from the way we use an object, especially as far as timing is concerned. Although we are part of the architecture the same way that objects are our most immediate and artificial extension, they are (usually smaller than that of an architectural construction) those who construct discontinuously our intratemporality.
    This communication, through the proposed analysis, demonstrates the importance of knowing (and therefore understand) the time scale that defines and enables our objects. Only through the tool that is the consciousness of his reality we will be able to get to optimize our designs in order that our intentions are expressed through our objects.

  10. A parametric associative modelling of aeronautical structural concepts under C<sup>0</sup>, C<sup>1</sup> or C<sup>2</sup> continuity constraints

    V. Dattoma, M. De Giorgi, S. Giancane, P. Manco, A.E. Morabito

    Abstract

    Purpose: In this paper, an associative-parametric approach is proposed in order to model the mesh of an aeronautical concept starting from a set of high-level structural primitives. To assure orders of continuity higher than C0 between adjacent instances, a suitable mathematical description of the structural primitives has been identified. The maintenance of the continuity constraints must be assured when the mesh is modified. Method: The Bézier curve and the Coons surface patch, with a suitable degree, are used in order to assure orders of continuity higher than C0 in the connection points or edges. Appropriate schemes of dependences are identified to assure the automatic propagation of the modifications complying with the continuity constraints. Result: The approach here proposed allows the designer to carry out the geometric modelling and the automatic mesh generation within one software environment in a fast and interactive way and complying with the geometric continuity constraints and the one-to-one correspondence between the mesh elements. This represents evidently a large advantage since the structural optimization process is simplified, with a relevant man-hours saving. A lower number of data transfers between different software is, moreover, involved with less problems related to the data corruption. Finally low conceptual value operations, due to manual correction activity of the model, are eliminated. Discussion & Conclusion:
    The methodology here proposed allows the automatic propagation of modifications satisfying the geometric continuity constraints and the one-to-one correspondence between the mesh elements. The approach is implemented into a CAD/CAE tool, called MeshFEM and developed using C++ and Matlab languages and the VTK library for the 3D graphic visualization.

  11. The detection of petroglyphs through digital image processing. The particular case of the stone inside the chapel of Saint Bartolomé (Lugo Spain)

    M.L. Gil, J. Ortiz, S. Martínez, B. Vazquez,T. Rego

    Abstract

    Purpose:
    This study explains the process of identifying a petroglyph detected in a rock for its subsequent analysis. As the petroglyph is practically invisible to the naked eye, photography and digital image processing is used to make its study possible.
    Method:
    Several bands generated from digital photographs captured in the region of the spectrum of the visible and NIR permit the digital analysis of the information as in remote sensing: the application of diverse algorithms, true colour composites, false colour NIR composites, filters and enhancements.
    Result:
    The best results obtained correspond with the true colour composite image filtered with a Gaussian filter 3x3 and enhanced with an adaptive enhancement. The inverse image also provides useful information for the analysis of the petroglyph. The highlighted features of the stone are, finally, digitalized.
    Discussion & Conclusion:
    The processing applied, allows emphasize the existence of a petroglyph. NIR image analysed has not contributed to provide notable information to the possible existence of rests of paintings or micro-vegetation.

  12. Geometric modelling of metallic foams

    A. Carofalo, M. De Giorgi, A. Morabito, R. Nobile

    Abstract

    Purpose: The aim of this work is the development of a procedure able to model the highly irregular cellular structure of metallic foams on the basis of information obtained by X-ray tomographic analysis. Method: The geometric modelling is based on the feature “pore” characterized by an ellipsoidal shape. The data for the geometric parameters of the instances are obtained with a methodology which is driven by the pore volume distribution curve. This curve shows how much the cells, whose diameter belongs to a given dimensional range, contribute to the reduction of the total volume. Result. The presented methodology has been implemented into a CAD tool consisting of a Matlab routine identifying the instances of the feature “pore” and a CATIA’s macro modelling the closed cells foam. Discussion & Conclusion: The CAD model developed for two types of closed cells foams approximates by considerable accuracy both the density and the volume distribution of the real foams.

  13. New materiality: Digital fabrication and open form. Notes on the arbitrariness of architectural form and parametric design

    Carlos L. Marcos

    Abstract

    Topic Area: Innovative Methods in Architectural Design Digitally conscious architectural design is founded on the assumption that computer tools should modify architecture’s own language, not just the way architects must work. The idea of open form is the result of producing encoded designs, that is: geometry is defined parametrically and codified in a non material language instead of being imposed over materiality –drawings or physical models- as is characteristic to architectural design tradition. A parametric design is open in as much as it defines a topological model where the connectivity between the parts and their relation to the whole generates a typology of possible designs limited by the range of parameters involved. Some parallels can be drawn with Eco’s idea of open form referring to some artistic production of the second half of the XX century. The increased complexity that can be achieved with new design tools has often led to a banal formalism inconsistent with architecture’s own tradition. The baroqueness of recent digital designs is confronted with the aesthetics of simplicity established by Modernism derived from its constructive principles. As Tafuri or Moneo pointed out, and recently Eisenman has proved with his own architectural production, there is a certain degree of arbitrariness in architectural form. However, architectural sense must rely on the principles of utility and construction. Thus, arbitrariness of architectural form should not be confused with arbitrariness of architectural design; it just refers to the fact that the complexity inherent to architecture may not optimize the relation between form and function. Thus, a variety of different architectural forms may well suffice the use requirements for each project. Digital tools have improved the potential of architectural design thus broadening architecture’s role and providing the apparatus to explore geometries and constructive systems that would have been unimaginable decades ago. C.A.D./C.A.M. tools are beginning to produce extraordinary synergies in the context of complexity. Digital fabrication is the logical extension to digital design as it relies on the computers’ precision and their potential to manage complexity in varied ways, shifting from construction to manufacturing.
    The aim of this paper is to analyse the relation of open form and digital fabrication. Conceptually, it will address what has been referred to as new materiality understood as the constructive logic intrinsic to materials and new fabrication techniques. New materiality may articulate an architectural constructive logic as stated by Milizia in the XVIII century and new digital fabrication techniques.

  14. Development of an algorithm for a triangular approach to the sphere based on the Platonic solids using MATLAB scripts

    M. Heredia Conde, Manuel Pérez Vázquez, José M. Gomis Martí

    Abstract

    The sphere is a common object in uncountable engineering problems, which not only
    appears in structural elements like domes but also in thousands of mechanisms normally
    used in diverse kinds of machines. To design, calculate and analyze the behaviour on service
    of spherical elements it’s essential to have a good method to create an ordered group of
    discrete points of the spherical surface from the parametric equations commonly used to
    define the sphere continuously.
    One of the best known and widely used in high-level programming environment is
    MATLAB. The programming language has thousands of functions, lots of them specially
    designed for engineering processes. One of these functions generates a sphere knowing a
    given radius and shows the result. Nevertheless, this function is really imprecise because it’s
    based on parallels and meridians besides the obtained vertices don’t keep a constant
    distance each other. That because it would be appropriate to design a new function to
    generate accurate discrete approximations of the sphere.
    The objective of this paper is create a low-level function in MATLAB to obtain a discrete
    sphere with high regularity and high approximation in order to provide a good base to solve
    sphere-based engineering problems. To ensure a perfect symmetry and a high regularity
    platonic bodies will be used as a base to divide the continuous spherical surface in a finite
    number of regular triangles. The obtained results for the different seed bodies will be
    represented graphically and compared to each other. The accuracy of each method will be
    evaluated and compared too.

  15. Engineering designer curricula and creativity development

    F. Rosa, E. Rovida, R. Viganò

    Abstract

    Product eco-sustainability and cheapness are two of the main strategies adopted in the contemporary market to exit from the current economical crisis, as testified by the adoption of several ideas of the green-economy. The design of product according to these new requisites will entail new challenges for engineers: their creativity will gain more and more importance to find out new design “starting points” and to conceive new industrial products. These considerations are the basis of the proposed curricula modifications. Since we believe that at least an embryo of creativity could be found in everyone, the main goal of our curricula proposal is to start the growth of this embryo, showing to the students how to study also old problems from different points of view. The described proposal, conceived to achieve this goal, comprises the upgrading of the curricula, by including some topics concerning technical history and nature observation as sources of innovative technical solutions.

  16. Shape optimization of smooth surfaces with arbitrary topology

    Przemysław Kiciak

    Abstract

    A popular method of constructing a smooth surface with arbitrary topology is choosing an irregular mesh and applying iteratively the Catmull-Clark algorithm. The sequence of meshes obtained in this way converges to a surface, whose curvature is continuous, except in a vicinity of special mesh elements; apart from the curvature discontinuity there, the limiting surface exhibits undesirable undulations, visible on curvature images. In this paper a shape optimization method is described, modifying vertices of the mesh to produce a surface with the curvature continuous and the undulations significantly reduced.

  17. Methodology for the metric restoration of the historical cartography applied to Francisco Coello´s cartografic series of the Royal Site of Aranjuez

    Juan Carlos Asenjo Carlos San Antonio, Rafael García

    Abstract

    This study presents a process for restoring part of the 1860s cartographic series known as Hojas Kilométricas (Kilometric Sheets). Specifically, the study focuses on those sheets referring to the city centre and surrounding area of the Royal Site of Aranjuez, a town in the south of the Province of Madrid. The aim of this study is to restore the actual size and measurements of scanned images of the Hojas Kilométricas. This would allow us, among other things, to reestablish both the format and scale of the original plans. To achieve this goal it is necessary to rectify and then georeference these images, i.e. assign them a geographic reference system.
    This procedure is essential in the overlaying and comparison of the Hojas Kilométricas of the Royal Site with other historical cartography as well as other sources related to the same area from different time periods. Subsequent research would allow us, for example, to reconstruct the time-evolution of the urban area, to spot new construction and to pinpoint the locations of any altered or missing buildings or architectural features. In addition, this would allow us to develop and integrate databases for GIS models applicable to the management of our cultural heritage.

  18. Parametric Cad in the teaching of drawing for Mechanical Engineer

    G. Defranco, L. Fuertes, S. Gavino, L. Lopresti, A. Ristevich

    Abstract

    For more than two decades, Computer Aided Design (CAD) has been increasingly taking part in the teaching of drawing for mechanical engineers and similar areas. The number of papers and communications presented by teachers of this area has increased in the last three decades, in different specialized and general events such as engineering, and the teaching of engineering congresses. 1 From the teaching point of view, the innovation has been centered in the increasingly use of the most spread CAD software in the world. 2 The use of it has tended to replace in a complete or parcial way the precision drawings, that were traditionaly made on boards by hand. In recent times a new inflection appears on the stage when the programs with an analytical parametric design philosophy and characteristics were introduced. The emergence of this kind of software impacts again on the traditional teaching of engineering drawing, putting in the hands of students and from the early stages of their studies a tool that necessarily leads them to get involved in aspects of design, even in the case when the expected goal is just to get a drawing. At the same time, the representations under international drawing standards became so simple as we could never have imagined before. This paper tells how the decisions were made to move towards a new paradigm of computer aided representation and how it was integrated to the concepts already present in the syllabus of the subject by means of tasks that imply the analysis of a mechanical system, its representation, the proposal of modifications on it, and the development of a technical report.

  19. Automatic alignment of multi-view range maps by optical stereo-tracking

    S. Barone, A. Paoli, A. V. Razionale

    Abstract

    Purpose: Industrial reverse engineering applications usually require reliable multi-view measurements of complex shapes obtained by full field techniques. One of the most challenging issues in this field is represented by the automatic computation of the best transformation parameters relating the different views into a common reference system. Method: A low cost optical tracking system has been developed with the aim at creating an automatic procedure to align 3D point clouds captured by a structured light system. The tracking system uses stereo images and retro-reflective infrared markers rigidly connected to the scanner. Markers are accurately tracked on the basis of automatic intensity-based analyses. Stereo correspondences are established by using epipolar and similarity constraints. Result: Experimental tests have been carried out in order to evaluate the capabilities of the developed system in the measurement process of nominal benchmarks and complex shapes. Discussion & Conclusion:
    The accuracy obtained in the automatic alignment of multiple views justifies the use of the proposed approach in the speed up of the measurement process for reverse engineering applications, especially when conventional high-end systems cannot be applied.

  20. A novel tool for pneumatic spindle design

    M. Carfagni, R. Furferi, Y. Volpe

    Abstract

    Pneumatic spindles have been introduced in a wide range of industrial applications. In fact, air motors offer a cost effective alternative to conventional electric devices and often remarkable functional improvements. In spite of their growing diffusion, air motor design is still performed mainly according to companies’ expertise, usually building a number of prototypes until the desired torque/speed (or power/speed) curve is obtained. The aim of this work is to provide a predictive model capable of estimating the characteristic curves by setting a set of air motor geometrical characteristics and inlet air pressure, in order to reduce the number of prototypes to be built. The presented study has been carried out with reference to vane motor, generally suitable for applications requiring high operating speeds. A statistical experimental approach (based on DoE technique) has been used in order to derive a mathematical-empirical model relating the geometrical and fluid-dynamic parameters with the system "response". The geometric parameters, defining the shape of the spindle, have been successively used to create a parametric CAD model with the corresponding technical drawings. The developed methodology, tested on a series of prototypes, proved to be effective in forecasting the characteristic curves of vane type air motor; moreover, due to the extremely low computational cost, it allows to assess a large number of design alternatives and to select the one best fitting the design target.

  21. Automated dyeing of free-form leather patch edges: a Machine Vision based system

    L. Governi, Y. Volpe, M. Toccafondi, M. Palai

    Abstract

    Many fashioned leather goods are characterized by seamless but visible edges, finished by means of time-consuming iterative processes involving edge grinding and subsequent dyeing. In the last years great efforts have been made by scientific and technical community to automate many leather manufacturing processes; therefore, the need to carry out manually the edge dyeing procedure represents a bottleneck for the entire leather finishing process. As a consequence the development of an automated dyeing procedure is advisable. The main purpose of the present work is to describe a Machine Vision based system for automatically dyeing leather patch edges. Such a system comprises two main parts: a Machine Vision (MV) system devoted to leathers edge detection and a CNC painting pantograph (2 axis Cartesian robot) whose painting tool is moved according to the output of the MV apparatus. The developed system, tested on a prototype dyeing machine, proved to be effective in delivering high quality edge finishing.

  22. Automation of the finishing process of steel yacht hulls based on optical scanning

    A. Paoli, A. V. Razionale, D. Saba

    Abstract

    Purpose: The manufacturing of large yacht hulls is a complex process in the shipbuilding industry. The traditional approach is based on the pre-fabrication of large steel panels that are welded together to form 3D superstructure assemblies. One of the most relevant aspects of a yacht is its visual impact. For this reason, a finishing phase is usually carried out in order to obtain a final target surface with smooth curvature. Current methodologies mainly rely on manual processes thus requiring a great amount of time and well-experienced workers. Method: This paper introduces an innovative methodology representing the basis for the automation of the finishing phase of large yacht hulls. The proposed approach is based on the measurement of the as-built hull surface through the integration of an active stereo vision system and a complex mechanical tracking system. A procedure to define the target surface has been developed by integrating information deriving from both the design and the as-built shapes. Result: The developed methodology has been tested on a broadside region of the hull of a 59 metres yacht assembled within a shipyard. A target surface, differing as little as possible from the design surface, has been modelled in order to obtain a uniform curvature shape. A finishing phase has then been carried out by applying a layer of filler and by milling the hull’s surface. Discussion & Conclusion:
    Results obtained have demonstrated the feasibility of the proposed approach, speeding up the whole process and guaranteeing fair reflection line patterns on the manufactured surface.

  23. Ergonomic design and analysis of a post in a stall

    Roberto Prádanos, Juan Manuel Sanz, Daniel Gutiérrez, Nerea de la Puente, José Ignacio Rojas, Manuel Domínguez, María del Mar Espinosa

    Abstract

    Purpose:
    The present work is a study of a street stall, which offers the public newspapers, magazines and books, as well as sweets, crisps, etc, and which has a very reduced space at its disposal for keeping and arranging goods.
    Method:
    We will apply the design for maximums and minimums based on percentiles. With these facts it was possible to model a stall with the CATIA system which has an ergonomic analysis module for the intended objectives.
    Result:
    The solution reduces muscular tension provoked by inadecuate positions.
    Discussion & Conclusion:
    This implied a completely new distribution of the space inside the stall

  24. Determination of orthometric heights from LiDAR data

    J. L. Pérez, A. T. Mozas, A. López, F. Aguilar, J. Delgado, I. Fernández, M. A. Aguilar

    Abstract

    Mapping mission is to obtain an accurate representation of the form and the elements that exist in a particular area or region. Therefore, mapping projects often use a large number of points, which in recent years has increased with the use of LiDAR systems. The orthometric height determination can be done from a local geoid model determining the undulations with respect to the reference ellipsoid for each of them. The use of this methodology for all points may not be necessary in many cases, because of the accuracy of the acquisition system (~ 15cm) and the geoid model. So, we can minimize the number of points needed to determine the undulation and interpolate it in the rest of LiDAR point cloud. This paper shows the results of the analysis of various simplifications applied to the number and location of points with the geoid undulation known for determining the orthometric heights of points acquired through LiDAR system.

  25. Mathematical modelling and simulation of an adjustable-stiffness spring

    J.M. Chacón, A. González Rodríguez, A. Donoso, A.G. González Rodríguez

    Abstract

    An adjustable-stiffness actuator composed of two antagonistic non-linear springs is proposed in this paper. The elastic device consists of two pairs of leaf springs working in pure bending under large displacement hypothesis. Owing to this geometric non-linearity, the global stiffness of the actuator can be adjusted by modifying the shape of the leaf springs. A mathematical model has been developed in order to predict the mechanical behaviour of our proposal. The non-linear differential equation derived from the model is solved, obtaining large stiffness variations.

  26. Geometric processing of GeoEye-1 satellite imagery for coastal mapping applications

    Manuel Ángel Aguilar, Fernando J. Aguilar, Antonio Fernández, Ismael Fernández, María del Mar Saldaña, Andrés M. García Lorca, João G. Negreiros, Alfonso Viciana, Elena González

    Abstract

    In 2008 and with the cooperation of the U.S. Department of Defence, it was launched a new commercial very high resolution (VHR) satellite named GeoEye-1 (GeoEye, Inc.) which, nowadays, is the commercial satellite with the best geometric resolution, so much in panchromatic (0.41m) as in multispectral (1.65m). More recently, on January 4, 2010, DigitalGlobe have begun to commercialize imagery of the last of the VHR satellites launched: WorldView-2. Its most relevant technical innovation includes the radiometric accuracy improvement, since the number of bands that compose its multispectral image has increased to 8, instead of the 4 classic bands (R, G, B, NIR) of the previous VHR satellites. These new VHR satellites offer important improvements closely related to spatial and spectral resolution. Therefore, an improvement is awaited in: (i) the geometric accuracies obtained in orthoimages and digital elevation models (DEMs) generated from scenes of GeoEye-1 and WorldView-2, as well as, (ii) an increase in the accuracy of the objects classification (urbanizations, buildings, highways, impervious zones, crops). These possible improvements will have to be contrasted with real tests carried out in field conditions, studying the ideal performance procedures in the seeking of accurate geo-referenced information. In this work the geometric accuracy of a single panchromatic image of GeoEye-1 with an off-nadir angle higher than 20 degrees was researched. Rational Polynomial Coefficients refined by a zero order polynomial adjustment (RPC0) was the sensor model that generated the best results. Using a DEM with a vertical accuracy of about 1.34 m, accurate orthoimages (planimetric root mean square error of 0.87 m) can be obtained from GeoEye-1 imagery.

  27. Architectural survey and Robotics: new frontiers in study, preservation and restoration of historical sites

    M.Cigola

    Abstract

    In this work a study of feasibility is illustrated to design and build a mobile robot for inspection and analysis of historical sites of architectonic interest. This novel application for robotic systems can be considered of great interest because nowadays the need of more and more accurate and efficient survey activity requires enhancement and even development of procedures with more reliable, innovative, and advanced characteristics. Within this expectation robots and robotic systems seem to be suitable solutions even with the purposes of: operating in environments that cannot be reached by human operators. The study of feasibility concerns with the analysis and simulation of a robotic system that can be used for operating in historical sites. Basic features of such mobile robots, either legged or wheeled, are well known, but specific requirements should be considered for the proposed applications in archaeological/architectural sites, which can be considered as a novelty in the field of Robotics. Basic features of the proposed robotic system can be summarized as follows: the robot should be able to move inside the archaeological and/or architectural sites by carrying surveying devices and by avoiding damage of the surface and other parts of the site. In Cassino preliminary design considerations have been developed and a suitable simulation has been carried out in order to test a designed robotic system acting on a simulated pavement, for several operating conditions. The simulation process is of basic importance, since it is not possible to test in advance the robot on site and there are not precise information about the preservation of pavement under-study. A simulation has been carried out with different conditions and it has been also useful to test the operation of the design of a robotic system with hexapod structure. At this moment, the research in Cassino is in a final phase concerning with first applications of a robot prototype. However, a continuous review of the design work is undergoing to formulate a general problem in which the design of a suitable low-cost easy-operation robotic system is properly defined also for not expert users in the field of robotics. The prototype activity is performed with the aim to design a specific test-bed through which verifies the identified design requirements and feasible solutions even for the operation of the system.

  28. Tomas Lopez’s geographic atlas of Spain (1787) and its hydrographic network: GIS analysis of the “Reyno de Jaen”

    SAN-ANTONIO-GÓMEZ Carlos, MANZANO-AGUGLIARO Francisco, MARTÍNEZ GARCÍA Josefina

    Abstract

    Knowledge of the development of hydrographic networks can be useful for a number of research works in hydraulic engineering. We thus, intend to analyse the cartography regarding the first work that systematically encompasses the entire hydrographic network: Tomas Lopez’s Geographic Atlas of Spain (1787). In order to achieve this goal, we will first analyze –by way of the Geographic Information System (GIS) – both the present and referred historical cartographies. In comparing them, we will use the then-existing population centres that correspond to modern ones. The aim is to compare the following research variables in the hydrographic network: former toponyms, length of riverbeds and distance to population centres. The results of this study will show the variation in the riverbeds and the probable change in their denomination.

  29. Graphical formulary of statically determinate and indeterminate beams

    Pedro Gonzaga, Lázaro Gimena, Maite Crespo, Faustino N. Gimena

    Abstract

    From the intrinsic graphic resolution shown by the authors in the IXth International Congress of Graphic Engineering in Málaga in 1998, in this communication are made graphical chips for calculating beams with different types of support, whether they are statically determinate or indeterminate. It is shown the analogy that exists between the graphical approach, analytical and numerical. The procedure developed to make the graphical form can be extended beyond the field of structural analysis to other fields of technical application. It is intended that the presented graphical procedure serve to examine and analyze structural problems and that their use is appropriate for education.

  30. Main axonometric system related views as tilt of the coordinate planes

    Lázaro Gimena, Pedro Gonzaga, Faustino N. Gimena

    Abstract

    In this communication we start both from a trirectangular trihedral defined by the
    three coordinate planes and a fourth plane, called the chart or projection, which
    contains the vertex of the trihedral above. Later we define the main related views
    or trihedral views as those produced by the tilt of the three coordinate planes to the
    outside of their trihedral on the chart plane. For each projection plane there are
    some unique main related views, regardless of the projection direction. In turn,
    from the trihedral views we can obtain the axonometric perspective from which
    they come. These properties can simplify some graphic constructions of the
    axonometric system, for example, determine the projections of the axes from the
    main related views or determine the axonometric scales from the axes. It is
    considered that this new definition of trihedral views allows a simplification as to
    the understanding of the systems of representation and is intended to be suitable
    for teaching purposes.

  31. Parameter combinatorial diagram. Application to the study and analysis of Hydrological Simulation Models

    Mikel Goñi, José Javier López, Faustino N. Gimena

    Abstract

    In this paper we define Parameter Combinatorial Diagram as the joint graphical representation of all box plots related to the adjustment between real and simulated data, by setting and / or changing the parameters of the simulation model. To do this, first we start with a box plot representing the values of an objective adjustment function, achieving these results when varying all the parameters of the simulation model. Then we draw the box plot when setting all the parameters of the model, for example using the median or average. Later we get all the box plots when carrying out simulations combining fixed or variable values of the model parameters. Finally all box plots obtained are represented neatly in a single graph.
    Besides being able to represent the box plots associated with an objective function it is possible to represent the diagrams associated with the variation of each parameter. It is intended that the new Parameter Combinatorial Diagram is used to examine and analyze simulation models useful in practice. This paper presents combinatorial diagrams of different examples of application as in the case of hydrological models of one, two, three, and five parameters.

  32. Design of physical prototypes to analyze aerodynamic effects

    J.L. Santolaya, R. Miralbés, V. Navarro, J.A. García, E. Calvo

    Abstract

    The testing of physical prototypes is a critical step in the product design process since it allows detecting ignored faults and establishing actual manufacturing costs. By means of tests in experimental facilities, it is possible to obtain clarification on complex problems, to improve mechanical systems operation and to compare empirical results with theoretical models and numerical simulations data. This work was aimed at designing of two different physical prototypes for specific purposes: a device to achieve the efficient atomization of a bulk liquid and vortex generators units to reduce drag in heavy trucks. In both cases, the involved aerodynamic phenomena will be comprehensively characterized in laboratory.
    Special emphasis was put in the development of prototypes which were able to allow us making a wide number of distinct alternatives with low building costs. Thus, modular designs based on the quick exchange between parts, were carried out. In addition, simple geometry components and basic mechanical systems were proposed. In the two cases, up to 400 different configurations of study were obtained.

  33. Leonardo’s civil bridges

    J. Alonso Trigueros, A.L. Romera Zarza, G. Fernández San Elías

    Abstract

    Within both aesthetic and history fields, civil engineering occupies a privileged place among arts whose manifestations are based on drawing. In this work, Leonardo’s creativity concerned with civil bridges proyects, have been studied. Leonardo designed ten bridges: eight of them intended for military porposes and only two were purely planned for civil functionaly - “Ponte sul corno d’oro”, infolio 66, manuscript L; and “Ponte a due piani”, represented in the Manuscript B at the Institute of France, infolio 23. There can be no doubt about Leonardo’s intentions when he started on designing these two bridges: his genious for creativy focused on providing both singulary and functionaly to the structures: they should be admired and utilized at the same time, a monument for civil society to be used.The work presented here attemps to make an scientist-historical trip along these Leonardo’s bridges, highlighting their technical, geometrical and aesthetic characteristics, as well as emphasizing Leonardo’s human, scientist and artistic nature.

  34. Improvements in the determination of extrapolated shorelines using Elevation Gradient Trend Propagation method

    Ismael Fernández, Fernando J. Aguilar, José L. Pérez, Manuel A. Aguilar, Antonio Mozas, Andrés L

    Abstract

    Shoreline represents a coastal evolution indicator. Hence there is a necessity to develop new methods of shoreline mapping. Nowadays the most widely used method to compute the shoreline position is the so-called Cross Shore Profile method (CSP), which is based on computing a linear regression along different cross-shore profiles to interpolate the corresponding shoreline. However, the Mean Sea Level (MSL) datum makes difficult to get points under the datum elevation due to daily tidal variation, run-ups and waves. Therefore, it is necessary to develop a geometric extrapolation method to estimate the shoreline. The present work aims to validate a shoreline extraction method using the Elevation Gradient Trend Propagation method (EGTP), which extrapolates the local gradient until the desired datum is reached. This validation was also carried out over the CSP method. Due to the lack of reliable vertical data around the MSL datum, the 0.4 m. contour was used as the synthetic MSL because it was the lowest contour level not presenting noise effects. Both extrapolation methods were applied from different reference elevations: 0.6, 0.8 and 1.0 m. The vertical range needed for CSP adjustment took 0.4 m. above each of the aforementioned reference elevation. Moreover, an additional method was applied to the data consisting of a mixed two steps method: first, the extrapolated Digital Elevation Model (DEM) is computed from EGTP and, second, the final shoreline is extracted by applying CSP on the EGTP extrapolated. The standard deviation of the differences between the supposed shoreline truth and the estimated shoreline over 14 homogeneous sample regions points out the accuracy of the applied method. The results of this work showed the goodness of EGTP shoreline extraction method compared to CSP one since the corresponding extracted shoreline was significantly more accurate. Moreover, the mixed method turned out to be very close to the original EGTP except in a few areas where it was proved the influence of profile orientation in CSP method. Finally, the influence of the starting extrapolation elevation was also proved, showing that the highest errors clearly matched the highest vertical differences between reference datum and starting extrapolation elevation.

  35. Design of a new tibial intramedullary nail

    T. Ingrassia, A. Mancuso

    Abstract

    Aim of this work is designing a new intramedullary nail able to reduce the drawbacks of the distal locking, ensuring the axial stability, so enabling a speedy recovery of the fracture and a time-reduced immobilization of the limb. During the first phases of the design process, the parametric CAD model has been carried out and, successively, several numerical analyses have been set up to verify the nail behaviour under the usual post-operation loading conditions. In particular, non linear FEM analyses have been performed to define the right nail positioning, the average and maximum values of stress and contact pressure, and the stability of the joining by means of the new nail. The obtained results have shown a not uniform contact pressure distribution at the nail-tibia interface due to the irregularity of the inner surfaces of the tibia. Moreover, no longitudinal or rotational sliding has been observed during the numerical simulations, then demonstrating the effectiveness of the distal locking by the expansion of the flanges nail. The new designed nail, besides simplifying the distal locking procedure and reducing the operation time, it is able to assure a reliable distal fixation and ensuring the stability of the system.

  36. Modeling methods in parametric design. Order matrix

    Jaime López Soto, Pilar Ramírez López-Para, José Luis Caro Rodríguez

    Abstract

    Purpose: This paper is the result of a project to improve methods of digitization through parametric CAD software. Method: Geometric relations are one of the most repeated problems in digitization models. Therefore, it was proposed a tool to help manage the work of establishing the necessary relationships in models digitization. It is based on doing, previously, a Functional Analysis and a Geometric Analysis of the model. (López Soto et al. "Analysis of modeling methods in parametric design. Analysis of Geometric Relations." XXI International Congress of Graphics Engineering. Lugo, Spain, 2009). The purpose of this paper is a protocol which gathers all the results obtained after applying the previous analysis. Thus, the information condenses into a single document the Model Analysis. Result: This protocol of analysis would be a prelude to the implementation of the model with CAD software. It lets you define, and sequencing, the primitive geometric components and order to achieve maximum independence. The tool consists on a matrix that relates the geometry of the part with the CAD software operations, resulting in a highly graphical and intuitive tool. It shows the process of digitization to get a quality model. Discussion & Conclusion: The Model Analysis involves a time of preparation of the steps to digitization a part. This extra time is compensated by a greater time savings in subsequent interpretations and model reuse. Of course, the Model Analysis should be independent of the CAD software used in its implementation. Once the analysis is completed it shall proceed to elect the best CAD software to continue the design process. The activity of designing objects requires many revisions and updates of its parts. To succeed, we must be systematic and give utmost importance to detail from the beginning to the end of the design activity. Therefore, it is essential to perform a detailed Model Analysis for the modeling process, but software developers announced that all applications can be modified without unexpected changes arise.

  37. Evaluation of the experiential levels of CPGs (Consumer Packaged Goods) using 3D modelling

    Serrano Tierz A., Rebollar Rubio R., Lidón López I., Fernández Sora A., Julián Pérez F., EspinachOrús F.J.

    Abstract

    The design of packaging is a determining factor when choosing consumer packaged goods, particularly those considered to be impulse purchase products. In these cases it is useful to have a precise idea of which is the most suitable design for the image and values that the brands aim to convey. Most of the research conducted in this field focuses on the sensorial aspects transmitted by packaging without delving into the experiences associated with the perception or consumption of the product. The investigation presented in this article aims to analyse the influence of the form and colour of the packaging on the perception of potential consumers. For this purpose a questionnaire was designed with 29 areas that analyse both sensorial and experiential levels, relating them to the predisposition to buy a product. Some 400 people were interviewed and presented with 9 different proposals for chewing gum packaging. The designs were devised through combining three different forms and colours that were rendered through 3D modelling.

  38. Vertical metadata in learning objects to recovery the industrial historical heritage

    M. Castro-García, J.I. Rojas-Sola, M.P. Carranza-Cañadas

    Abstract

    Every day, new methods and techniques to represent the past are investigated. Frequently, those innovations are incorporated in other knowledge areas where graphics engineering has previous experience in this important subject. As current examples can be cited the reconstruction of Virtual Reality (VR) with realism character covering the resource and to study the interaction with their environment, anthropological or otherwise, or Augmented Reality (AR) techniques with applications in museums or interpretive centres, among others. In particular, these techniques are mainly based on two-dimensional (2D) and three-dimensional (3D) models, which in its development stage, Computer-Aided Design (CAD) techniques produce a lot of educational materials, likely to be used for training of future researchers in cultural heritage subject. Setting this idea as starting point, this article is based on the work of recovery in industrial heritage, such as windmills, to identify key learning points. Once detected these, it is possible to create Learning Objects (LO). Later, may be used in any educational system, for example, at Learning Management System (LMS).
    The proper functioning of the system depends on the existence of a standard vocabulary as SCORM, trying to be a reference to the creation of LOs using CAD techniques in the field of cultural heritage.

  39. The geometrical specification in concurrent product design

    L. López, J. Cerqueiro, J. Pose

    Abstract

    In this paper, in the first place an analysis on the usual practices for the specification of acceptable geometrical variability in functional geometrical features of parts is carried out, and an interpretation on the ‗geometrical variability specification‘ concept as introduced by ISO standards is established. In the second place, a wider and more integrative proposal for geometric specification is made, conceived as a concurrent process inside the product design and development process itself, where all problems referring to tolerancing-related information handling along the product life cycle are dealt with.

  40. Robust surface matching as a rapid technique for terrain change detection

    Fernando J. Aguilar, Ismael Fernández, Manuel A. Aguilar, Jorge Delgado, Joao G. Negreiros, José L. Pérez

    Abstract

    Digital elevation models (DEMs) are widely used in GIS to predict the impact of coastal flooding and Sea Level Rise in coastal areas. Furthermore, DEM change detection within a certain time period may be also used to automatically quantify the coastal landscape changes. In this sense many researchers have adopted 3D surface matching techniques without control points (GCPs) to automatically co-register multi-temporal DEMs. In this paper a new approach based on robust surface matching for DEM 3D geo-referencing is proposed to avoid the costly and time-consuming necessity of GCPs. The algorithm starts from a coarse orientation of the historical DEM where the stereo model y-parallax is removed by means of an Automatic Relative Orientation. Additionally, it is necessary to manually mark three control points to apply a coarse Helmert 3D transformation, obtaining a preoriented stereo-pair which turned out to be helpful to improve and speed up the subsequent surface matching process. Absolute z-differences between reference and historical DEMs are calculated, allowing for the application of the widely known K-means algorithm to cluster up to four groups of homogeneous absolute differences. The two clusters showing the high values are considered as outliers or areas where terrain has significantly changed. The remaining areas are deemed as potentially matching areas where the robust surface matching can be applied using the M-estimator called Tukey’s Biweight (TB). In this way the diagonal weight matrix, regarding TB function, is introduced in an iterative least square routine to compute the Helmert 3D transformation parameters. The proposed methodology was tested for geo-referencing a historical grid format DEM, comprising a little coastal area of Almeria (South Spain), obtained by digital stereo-photogrammetry from a B&W photogrammetric flight taken in 1977 at an approximated scale of 1:18000. The reference DEM was the 10 m grid-spacing digital elevation model produced by the Andalusia Regional Government (Spain) from a 1:20000 scale B&W photogrammetric flight taken in 2001. As well, we counted on two accurate DEMs based on LiDAR technology (ground truth) taken in 2005 and 2009 respectively. The results obtained from this work may be deemed as very promising, showing a high efficiency and accuracy for historical DEM 3D geo-referencing. After the application of the robust surface matching for non-altered or stable areas, the computed uncertainty, measured as standard deviation of DEM z-differences, turned out to be 1.08 m. That is quite similar to the estimated uncertainty for the reference model (around 1.03 m).

  41. Preliminary Design of a New Bridge System for a Modern Mine Hunter Vessel

    D. Boddi, M. Vezzani

    Abstract

    The present work summarises some of the most relevant aspects of an activity for a preliminary design of a new bridge system for a modern Italian Navy mine hunter vessel. The authors have contributed to such activity as a naval consultant and a CAD consultant respectively. The solution proposed by the authors is an integrated bridge system, which is an original solution for Italian Navy. The first part of the work defines the optimum instrumentation for the implementation of operational tasks and analyses the correct positioning for each and every console within the integrated bridge. The second part of the work describes the design activity through the use of 2D and 3D CAD software, taking into consideration the functional, operative, dimensional and ergonomical aspects of the instrumentation. As a result of the activity, an operative methodology is proposed, aimed to reduce the design time. It is not possible to provide a complete design description as far as part of the information is confidential.

  42. New key factors in drawing up a building Innovative methods in architectural design

    M. Valiente López, T. Gil López, E. Martínez Borrell, I. Anta Fernández

    Abstract

    When we draw up a building we are using our personal way of approach to architecture. We are interpreting the building. We must do a detailed study of the object: construction, structure, ... Drawing by computer is widely used in the architect community, more and more the architects’ studio and ateliers demand the professional who collaborates in the tasks of production and drawing of the architectonic planes, with more knowledge in the computer drawing. Lately the introduction of the presentations in three dimensions and multimedia causes the professional to get knowledge on these means and their use. Nevertheless, the virtual pads introduce a fundamental concept in drawing up plans or plan survey. But a problem exists, to access to the virtual graphical representation without the necessary maturity in the field of the Architectonic Presentation. We must think that independently of the used technique it is very important to know the aim a priori that is wanted to obtain, since this one is the only mean to obtain it. For that reason, a constructive understanding of the architectonic work is advisable, before realising any representation of it, and based on it, we will choose the more suitable technique of representation. It is for that reason that seems so important to us to make an analysis of the drawing up a building and its problems. From the Madrid Politecnic University, we must begin to stimulate the new forms to express the architecture, imaginary or constructed, and to express with a clear and concise language our work, so that we pruned to show from different points of view our finished work or process of creation. Consequently, we must try to balance the feeling of using such a powerful means for designing as those based on computing techniques with the intrinsic value of the graphic means based on the traditional manual ones. We consider it is the best approach for using the new technologies.

  43. Characteristics of conic segments in Bézier form

    Javier Sánchez-Reyes

    Abstract

    The rational Bézier form has become a standard in CAD-CAM packages and data exchange formats, because it encompasses both conic segments (in the quadratic case) and general free-form geometry. We present several results on the relationship between the quadratic rational Bézier form and the classical definition of conics in terms of their characteristics, such as foci, centre, axis and eccentricity. First, we recall a simple geometric procedure to compute arbitrary conic segments of given focus in Bézier form. Second, from this procedure we derive the geometric characteristics of a given Bézier conic in a straightforward manner, by employing complex arithmetic. For a central conic, a simple quadratic equation defines the foci location, and its solution furnishes not only an explicit formula for the foci, but also for the centre, axis direction and linear eccentricity.

  44. Portraits of lost and possible cities

    M.P. Iarossi, F. Belloni

    Abstract

    At present the urban representation is largely entrusted to management of cartographic information by the GIS-Geographic Information System, reduced to a simple archive system of the cartography now currently in use. But this procedure is very inadequate, because the cities are the result of the passing of time and stratifications of slow changes and projects of radical reform. Therefore, the urban representation must introduce the time dimension and include also the carto-iconographic historical heritage. A representation system so extended makes it possible to: - describe the changes over time of the whole city or of its single sites, as well as the language with which the city itself has built its portrait and has communicated its identity through time; - favour the preservation and the divulgation of the archival heritage, often scattered in different archives. The research project “Portraits of cities in an interior” (co-ordinated by the Department of Architectural Design of Milan and to which participate the Universities of Bologna and RomaTre) have the objective to build a portal for an online access to the GIS of the heritage of cartography and iconography of Milan, Bologna and Rome. The project, currently in progress, thanks to the versatility of the webGIS - that permits to explore a heritage not homogeneous in terms of aims, representation system and scale - is able to create the conditions for knowledge about urban formation, transmittable to the most varied levels (from the specialist studies to the possibility of creating paths dedicated to school users or even to the planning of personalised museum journeys etc.).
    Moreover, among the most interesting potentialities there is the application to the definition of the “portraits of lost cities”, that is erased by the urban changes and the “portraits of possible cities”, consisting in the recomposition of the urban frames that could have derived from the realization of projects which remained on paper, as in the section dedicated to the big transformation projects of the Illuminist and Napoleonic Milan.

  45. Office furniture design for wheelchair user

    F.J. Castillo, O.D. de Cózar, I. Ladrón de Guevara, J. Jiménez, E.B. Blázquez

    Abstract

    There are an estimated 1.19 million wheelchair users in Spain. People use wheelchairs for a variety of reasons, the most common one is paralysis from spinal cord injuries. Current estimates indicate there are around 504.000 people alive in Spain with spinal cord injuries. Among other reasons for using wheelchairs are: fatigue from multiple sclerosis, muscle weakness from muscular dystrophy, lower limb spasticity from cerebral palsy, and missing limbs due to amputation. People who use wheelchairs may encounter a variety of obstacles at their workstations depending on their limitations. Some possible accommodations could be adjustable height desk or table for a person who cannot work comfortably at an existing desk, accessible filing system or office supplies, and frequently used materials on most accessible shelves or drawers for a person who cannot reach upper and lower shelves and drawers. This paper presents the graphical design of a workstation for wheelchair users, in this case, technical, anthropometric, ergonomic, aesthetics and scientists aspects have been analyzed. The design of composite structure conduct to explicit safety constraints applied to office furniture requirements kept continuously current and updated as part of innovation. Finally, results are showed in a three-dimensional model.

  46. Registration and 3D virtual reconstruction of the old Carmen's Spa Park (Málaga)

    E.B. Blázquez, M.L. Ladrón de Guevara, M.C. Ladrón de Guevara, F. Hermosilla, F.J. Castillo

    Abstract

    For nearly two decades, computer graphics technologies have been employed in several fields for various purposes. The safeguard, the protection and the fruition of the remains of the past have gained a powerful tool, thanks to the potentialities of immersive visualization and 3D reconstruction. Nevertheless, on many occasions, the graphic information handled by people working in the cultural heritage sector is still in two dimensional models. This paper presents the research carried out to fill a gap in the 3D cultural heritage registration of Malaga, in Southern Spain, by virtual recreation techniques. It illustrates a complete methodology to create a virtual exhibition system, based on archaeological finds and graphical-historical information of the Carmen’s Spa Park. The model developed allows the study and displays the historical representation of this cultural heritage.

  47. Design optimization based on eco-design and mechanical analysis

    I. Lopez, R. Miralbes

    Abstract

    The work presented here attempts to show the advantages of relating design tools and methods that impact on improvement methodology and outcome of product design, in this case eco-design and the mechanical analysis are related in order to optimize the design to generate a lower environmental impact without loss of functional performance. The methodology proposes a market survey to select the objects to analyze, in which observe the environmental impact analysis with a specific tool so the ranges of optimal values in production, use and disposal of values and objectives and as the use of eco-design strategies are set. At the same time, a mechanical study using reverse engineering, loads and stress analysis, by means of finite elements that just results in a number of conditions and values to be taken into account in future design. Once the research and analysis raises the design stage in which proposals are made, those are analyzed using the same tools, in terms of environmental impact and structural strength, to establish more robust design from a series of alternative proposals according to predetermined design criteria. This work aims to link the findings of both analysis so as to enable optimum results and compatible design specifications and thus show the current need to develop hybrid methods that relate to the different techniques and tools.

  48. Structural analysis of a posterior stability total knee joint replacement

    T. Ingrassia, L. Nalbone, V. Nigrelli, D. Tumino, V. Ricotta

    Abstract

    Aim of this work is to compare two different total knee prostheses that differ in the shape of the Polyethylene (PE) insert, trying to optimize the shape of the best one, in order to reduce the stress peaks. The study procedure has been divided into the following steps. First step has been the three-dimensional shape acquisition of the two prostheses by means of a COMET5 3D scanner. The morphology of two prototypes of the prostheses has been acquired by elaborating multiple Moirè fringe pattern projected on their surfaces. Second step consisted of the manipulation of these data in a CAD module, that is the interpolation of raw data into parametric surfaces, reducing singularities due to the typical scattering of the acquiring system. Third step has been the setting up of FEM simulations to evaluate the prostheses behaviour under typical loading conditions. The CAD model of the prostheses has been meshed into solid finite elements. Different flexion angles configurations have been analysed, the load being applied along the femoral axis. FEM analyses have returned stress fields in the PE insert and, in particular, in the stabilizing cam which function is to avoid dislocation. Last step has been the integrated use of CAD-FEM to modify the shape of the stabilizing cam of the best prosthesis, in order to reduce the stress peaks in the original prosthesis without compromising the kinematics of the joint. Good results have been obtained both in terms of stress and contact pressure peaks reduction.

  49. A novel method for sensitivity analysis and characterization in integrated engineering design

    A.O. Andrisano, M. Ansaloni, F. Leali, M. Pellicciari, A. Vergnano

    Abstract

    Purpose: The present research work aims to analyze and characterize processes in terms of sensitivity of their performances. Robust design techniques, generally adopted for product and process optimization, are not suited for investigating sensitivity. Then a novel approach to such engineering problem needs to be proposed. Method: The developed method integrates and extends to the analysis of manufacturing and technological processes the Performance Sensitivity Distribution (PSD) theory, primarily introduced to provide analytical and geometric description of performance sensitivity for robotic mechanisms. Result: Such novel method, named Specialized PSD, starts from the clarification of the sensitivity analysis problem by defining key parameters, i.e. Design Variables (DVs), Design Parameters (DPs) and Performance Functions (PFs). According to the PSD theory, PF sensitivity is expressed in terms of deviations of DVs and DPs and it is geometrically described by a hyperellipsoid in the n-dimensional space. Sensitivity indexes are then introduced to assess PF variation for different combinations of DVs and DPs deviations. Regression Analysis is adopted to provide the mathematical description of PFs so the PSD theory is finally specialized to be applied in a process sensitivity analysis. Injection molding of a plastic specimen is finally investigated to validate the proposed method. Discussion & Conclusion:
    This work specialize the PSD theory for manufacturing and technological processes, extending its original field of application thanks to a novel approach to the analytical expression of the PFs. Moreover, when 2 or 3 parameters are considered, sensitivity indexes are graphically represented through tolerance maps of colour, so the method can be easily adopt for integrated design, especially in the early stage of product and process development.

  50. A product innovation method based on the synergy between TRIZ and Interaction Design

    S. Filippi, D. Barattin

    Abstract

    Modern industries operate under very selective conditions, as all the competitors develop efficient and effective products. For this reason, innovation is one of the main ways to lead the market. There are some methods and tools to analytically help designers towards the generation of new ideas. TRIZ is one of these methods. But all of this is not enough to generate a success product, because a fundamental actor is still underestimated, the final user of the product under development. To satisfy the user's requirements, designers and developers must keep into consideration also the Interaction Design methods. Unfortunately, these methods are not as structured as the TRIZ theory and very often it is very difficult to apply them in an effective way. For all of this, it appears quite reasonable to think about the development of innovative, easy-to-use products, as helped by a synergy between the Interaction Design and the TRIZ theories. After some highlights about analogies and differences of these two domains, this paper develops the basis for the generation of a new integrated analytical method able to suggest a collection of guidelines for the definition and implementation of engineering requirements. Then this method is described, and the summary of a case study performed to validate the method closes the paper.

  51. Analysis Tool of the Management of Integrated Systems of Implementation in the Design of Systems of Industrial Organization in Smes Industrial Devoted to Mounts and Electrical Installations

    Ibáñez Carabantes Pedro, Sancho Val Joaquín, Fernández Sora Alberto, Callejero Cornao Bernardino

    Abstract

    In the present communication sets out the main characteristics of a tool of software developed for the analysis of the management of integrated systems of implementation in Smes industrial devoted to mounts and electrical installations. The design of this software and its implementation in different companies in this industrial sector, is one of the stages that make up the development of the doctoral thesis with the title SYSTEMS DESIGN OF INDUSTRIAL ORGANIZATION IN SMES INDUSTRIAL DEVOTED TO MOUNTS AND electrical installations, in the territorial scope of the Autonomous Region of Aragon. After the analysis of commercial applications of management, and detect shortcomings relevant for companies in this industrial sector, raised the development of a tool of control and valuation of the management of processes adapted to the particularity of the companies installing electric, which would act on appropriate procedures and thereby save the conditioning raised. The implementation of this software on a representative number of companies, has enabled progress in the next stages of generating a model for the management organizational integral that meets the requirements of a functional design dynamic, and in which the technical structure and manager of the system, is responsible for the coordination and overall management of the same.
    At present, and because of the situation of decline in production and economic deflation, the management structure does not evolve toward criteria of expansion, but maintains its functional structure. The work associated with this activity is based on tasks that can sustain this business structure minimum, and being expectant that the time economic change and the economy to resume challenges more ambitious.

  52. Elaboration of a GIS for the management of the new building of the Engineering’s School

    José R. Andrés, Eva Molero, M. Luz García, Miguel A. Contreras

    Abstract

    In this paper we present the creation of a GIS with the use of graphical representation as well as a data base with referenced elements of the new building of the Engineering’s School. The objective is to manage the distribution and the efficient use of the building. As parts of the work we will show these different phases: - Introduction of graphical data provided as cad drawings - Development of a data base referring the different areas of the building, their use, persons related to them, timetables, etc.; and the complex relations taken into account, needed to create an efficient system. - Integration of the previously elaborated data in a GIS platform (Geomedia-Intergraph) - Consults development - Publication as web system. The main difference with a traditional GIS is that we are not using geographically referenced data, but just graphical data. We are using a GIS system to support the management of a building. Besides we give access to the system to all the members of the university via internet.
    We show our results and explore new use of GIS as a management tool.

  53. Development of a trade-off function for robust optimization problems in design engineering

    Quirante Thomas, Sebastian Patrick, Ledoux Yann

    Abstract

    In industrial design processes, engineers and designers always need to perform compromises between many different design objectives. In particular, trades-off between nominal performance and design sensitivity have received increasing interests in the past few years. Robust design optimization methods focus on such conflicting issues in design engineering. Specific functions dedicated to the RDO framework, expressing the admissible compromises expected between nominal performance and design sensitivity have not yet stimulated much developments. The main purpose of this research work aims to develop a trade-off function to select among a set of alternatives, solutions which achieve rational compromises between design objectives. The design optimization model, composed by a model of the system behavior and a knowledge-based model, is formulated through observation, interpretation and aggregation functions. Such a procedure enables first to model preferences, provides a quality indicator for design solutions and finally turns the initial multiobjective optimization problem into a mono-objective problem which is solved stochastically by genetic algorithm. As an illustration of the trade-off approach, the method is used to achieve robust solutions for a side-impact crashworthiness problem.

  54. Redesign of an auto-levelling base for submarine seismic sensor

    M. D’Anna, T. Ingrassia, G. Mangano, V. Nigrelli

    Abstract

    The OBS (acronym of Ocean Bottom Seismometer) is a system to monitor the submarine seismic activity. To properly work, an OBS system needs a suitable auto-levelling base to maintain a fixed (horizontal) position during the measurement phases. In this work a new auto-levelling base for submarine seismic sensors has been designed. During the redesign process a preliminary phase of analysis of the state of art has been made. Afterwards, the technological solutions chosen by different manufactures have been critically analysed, and a full description of their functionalities, working principles and system performances has been carried out. Later, some innovative concepts have been proposed. Among these ones, the most interesting are the auto-levelling bases with spherical joint, based on: air bearings, ball bearings and magnetic levitation systems. The concept scoring method has been used to identify. as best concept, the auto-levelling base with spherical joint and air bearings system. Successively, the chosen concept has been implemented: the technical working principles have been studied to choose the best solutions in terms of dimensions, shapes, materials of all base components. A full parametric CAD model of the auto-levelling base has been also created. The new designed base, by using a very innovative auto-levelling system, allows to obtain very good results as regards the accuracy of positioning, so ensuring a remarkable improvement of the performances of the ocean bottom seismometers.

  55. Numerical fatigue life evaluation of an innovative internal combustion engine shaft

    T. Ingrassia, G. Lo Buglio, E. Lombardo, V. Nigrelli, G. Sergio

    Abstract

    A novel self-balanced internal combustion engine is presented. The new engine has a modular structure composed of two cylinders arranged in opposite way. It is characterized by an innovative system of linking between the pistons and the shaft, which has three toggles. One of these is on the middle of the shaft, whereas the others two are placed symmetrically. Thanks to this particular shape of the shaft, the pistons can move with the same timing and so the new engine comes back to be perfectly auto-balanced. Moreover, the fatigue life prediction of the shaft has been studied through numerical methods.
    In particular, two different approaches have been compared to estimate the maximum number of working cycles: the first is based on a “static” resistance criterion, the second considers the multiaxial nature of the stress and is based on the maximum shear stress (critical) plane criterion. The stress distribution on the shaft during the usual working conditions has been evaluated by a FEM package. Results highlight that the critical plane approach is more conservative than the “static” one.

  56. An investigation on the validity of 3D clothing simulation for garment fit evaluation

    Y.Y. Wu, P.Y. Mok, Y.L. Kwok, J.T. Fan, J. H. Xin

    Abstract

    Virtual cloth simulation received much attention in the past decade, and the fashion industry has been attracted to use this newly available tool in actual product development process to strengthen the collaboration along the supply chain and shorten the product time to market. This paper serves as an exploratory study to analyse the accuracy of 3D cloth simulation system so as to examine its validity and effectiveness in garment fit evaluation. A four-phase methodology is proposed in this paper: 20 types of woven fabrics are first tested in standard laboratory, and the obtained fabric property data are input to simulate the results of a flare skirt design. Real sample skirts are produced for comparison. An objective evaluation method is proposed to assess the accuracy of 3D simulation by comparing the quality of 3D virtual simulation results. Generally speaking, 3D clothing simulation is accurate because 18 out of the 20 tested fabrics have statistically similar results of 3D simulation and the real sample. The simulated results of the two fabrics are different from the real sample, particularly in the hip areas. Further study is thus required. With the range of validity identified, guidelines can be provided to the fashion industry for the use of 3D simulation system in design and fit evaluation.

  57. Shape Similarity: Methods and Industrial Applications

    D. Francia, A., Ceruti, G. Caligiana, A. Liverani

    Abstract

    Mass production, reduced production investment, reduced response time and variability, globalization and increased customization are the most responsible for the need of optimizing the manufacturing process. As companies provide higher levels of customization, the number of products offered increases. Minimizing the cost of providing variety is possible by exploiting shape similarities amongst parts and products. Another reason for utilization of similarity assessment is the cost estimation. Total cost of any part to machine results from material costs, setup costs, tooling costs, and operation costs. Furthermore in very small productions the total cost of new components is affected more than 70% by process planning and CAM (Computer Aided Manufacturing) programming. A relevant part of this time may be saved by modifying the process plan of an old similar part and this is a well known practice in the manufacturing industry. Shape similarity search in a CAD system is an answer to reduce process plan preparation because it finds similarities in geometry by extracting shape signatures from the 3D models and then comparing these signatures exploiting distance functions. This paper presents a review of the methods adopted to generate shape signatures and an analysis of the distance functions suitable for the comparison. The first part of this work investigates the models commonly proposed to extract the shape signature from a solid part. The second part of the paper discusses the choice of the distance function. At the end of this discussion the most appropriate method is proposed to assess the shape similarity, once the part to be manufactured has been assigned: results are shown in terms of accuracy of comparison and computational time, seeking for a trade-off between them.

  58. On the performance of several stereo calibration methods and models

    R. Furferi, L. Governi, M. Nunziati

    Abstract

    Stereo vision is a well-known technique which relies on a pair of cameras in order to reconstruct the shape and position of a generic object, without any additional geometrical and/or parametric information. The central issue in the set-up of a stereo vision system is two-fold: as first, removing the geometrical distortion caused by camera lens from images, then, make cameras aware of their own relative position in space. This paper is aimed to test the influence of different components of a calibration routine. In particular the goal is to compare the performance of several optimization algorithms and a number of alternative implementations of the pin-hole model. A main difference between this work and other tests present in literature is that the calibration performance is evaluated with respect to the measurement accuracy of the system, rather than by means of estimated reconstruction errors. In such a way, we get rid of theoretical errors, which do not represent any real application case, and we evaluate the accuracy on-the-field, facing with real-world issues. The obtained results show that, even though very complex equations can be used in order to represent cameras, usually, simpler pin-hole models remain competitive and robust, while refinements can be attained by using more powerful operational research algorithms.